Nailing Machine
The SMPA 2.ED nailing machine is designed for nailing single-operation 2-way and 4-way pallets. The capacity of the machine is 1-2 pallets per minute. Standardly, the machine is equipped with a universal template for preparing the top and bottom parts of the pallet. The nailing process itself operates on the principle of an electromechanical drive (two linear actuators) with minimal electricity consumption. The nailing machine can work independently or can be integrated into an automatic palletizing line with processing and stacking of pallets. The machine's operation is managed by two workers.
What types of pallets can you nail?
- Nailing of two-way and four-way pallets.
- For single-operation pallets
- A single-operation pallet, or all its parts, are manufactured in the same nailing cycle.
What is the capacity and serviceability of the nailing machine?
- The capacity of the nailing machine is 500 pcs/shift (8 hours).
- The machine is operated by two workers.
What dimensions of pallets can be manufactured?
Universal template (basic equipment)
- This template can be used to manufacture various types of pallets, thanks to simple readjustment using an Allen key. The basic configuration is set according to customer's wish, or for a classic pallet construction (e.g., EUR).
- Pallet width from 600 mm to 1200 mm (optionally up to 1500 mm without preparation of the bottom part of the pallet-legs and aftertreatment)
- Pallet length from 600 mm to 1500 mm (optionally 2000, 2500, and 3000 mm)
- If changing the type of pallet, the template also needs to be adjusted
Fixed template (optional equipment)
- The template is made precisely for one specific type of pallet according to customer's wish
- Pallet width from 600 mm to 1200 mm (optionally up to 1500 mm without preparation of the bottom part of the pallet-legs and aftertreatment)
- Pallet length from 600 mm to 1500 mm (optionally 2000, 2500, and 3000 mm)
- Conversion to another type of pallet is simple, by just exchanging the template.
What is the basic equipment of the machine?
- 3 boxes for bulk nails, each with 10 outlets - the number of boxes can be expanded to 4 pieces with 2 x 10 and 2 x 12 outlets. This depends on the pallet construction.
- 26 hammers (8 x small hammer for nails 27-50 mm, 18 x large hammer for nails 50-90 mm) - hammers can be expanded (up to 44 pcs) depending on the number of boxes and outlets and according to the pallet construction.
- Universal template for preparing both the top and bottom parts of the pallet
What nails are suitable for the nailing machine?
- All available bulk nails on the market with lengths from 27 to 90 mm, including EPAL nails, can be used.
- The accuracy of the nailing pattern is within a tolerance of +/- 1 mm
- The minimum spacing of nails is 25 mm.
Operating procedure for the SMPA 500.2 ED nailing machine
The SMPA 500.2ED pallet manufacturing machine utilizes a system of nailing the finished pallet and preparing the legs on a common table.
Pallet nailing process:
1. Blocks and bottom boards of the pallet (legs) are placed into the template in the work position on the left side of the table.
2. The prepared bottom parts of the pallet (legs) are transferred to the second template in the work position on the right side of the table, on which the operator lays out the slat and longitudinal boards of the pallet.
3. After loading the material into both positions, the operator presses the start button and the machine automatically performs the respective number of nailing cycles according to the pallet being produced.
4. The finished pallet remains in the output part of the machine after the nailing cycle, and the operator can remove it manually, or the pallet moves fully automatically to the next operation within the palletizing line.
5. The pre-prepared bottom parts of the pallet (legs) are returned to the starting position and the cycle repeats.
| P A R A M E T R | S T A N D A R D | O P T I O N |
| Built-in parameters | ||
|---|---|---|
| Length min. - max. | 4 500 - 8 500 mm | - |
| Width (including service staircase) | 2 150 mm (2 950 mm) | - |
| Height (minimum ceiling height) | 3 100 mm (3 300 mm) | - |
| Weight min. - max. | 2 980 - 4 000 kg | - |
| Pallets | ||
| Length min. - max. | 600 - 1 500 mm | 2 000, 2 500, 3 000 mm |
| Width min. - max. | 600 - 1 200 mm | 1 500 mm (without preparation of the bottom of the pallet - legs and aftertreatment) |
| Height min. - max. | 120 - 160 mm | - |
| Pallet Types | 2 way, 4 way; single-operational* | - |
| Pallet feed rate per nailing cycle | 0.6 m/s | - |
| Nails | ||
| Length min. - max. | 27 - 90 mm, EPAL nails | - |
| Type of nails | for machine nailing, loose | - |
| Polarization | non-magnetized | - |
| Precision nailing | +/- 1 mm | - |
| Nail spacing in a shape | min. 25 mm | - |
| Electrical Connection | ||
| Operating voltage | ~3x400 V / 50 Hz | - |
| Fuse | 3x32A Slow | - |
| Degree of protection | IP 54 / IP 20 | - |
| Air Connection | ||
| Compressed air pressure min. | min. 0.6 MPa - max. 1 MPa | - |
| Capacitive air consumption min. | 10 l/min. | - |
* The single-operation pallet or all its parts are produced in the same nailing cycle.
The SMPA 2.ED nailing machine can be equipped with a wide range of optional equipment, always depending on the specific production needs, the type of pallet, and its structural features.
Basic optional equipment includes:
- Expansion of the number of outlets from 10 to 12
- An additional nail box - up to 4 nail boxes can be installed, with configurations of 2x10 and 2x12 outlets
- Expansion of the number of hammers according to the quantity of nails used
- Extended striker for the hammer - this is most often necessary when the top part of the pallet has an even number of boards and at least one nail goes between the boards.
- Fixed pallet template
- Nail-through control
- Integrated modem for remote diagnostics and management
- Temperature control for the electrical panel and control panel
For a detailed description of various mechanizations and subsequent processing modules, refer to Machines for pallet production.
Do you need more information?
Enter your e-mail, and our sales representative will get in touch with you regarding the machine.
Write to us
info@stoerimantel.comcall us
+420 571 116 934
Watch a video
about this machine
Do you need more information?
Enter your e-mail, and our sales representatives will get in touch with you regarding the machine.
