KP 500 Automat

Basic Cutting Modes

1. Manual Mode You can set each cut length by moving the material using the buttons on the panel or by adjusting the length value on the control panel's dial. Initiate the cut pressing the button on control board. This mode is suitable for individual sequential cuts.

2. Automatic Mode

   a) Set a single cut dimension for the entire length of the input material. Upon initiating the cut with the pedal, the entire material will be automatically cut to this set value. After completing the cut, the feeder will return to the preset length value of the input material. This mode is suitable for the production of pallet blocks, allowing for a quick transition between different values during frequent changes in input material. 

   b) Set a desired combination of cut dimensions for the entire length of the input material. Initiating the cut with the pedal will result in the automatic cutting of the entire material into these combinations of lengths. After completing the cut, the feeder will return to the preset length value of the input material. The machine's memory can store up to 10 programs with 10 lengths each, allowing for the easy rewriting, editing, inserting, and deleting of programs. This mode is ideal for achieving high material yield and is particularly useful in the production of cross-sections for a wide range of packaging products. In automatic mode, you can set automatic front and rear trims.

Sturdy and solid construction with a robust cover

in the cutting area ensures high work safety.

Material Flow

In the basic configuration, the saw has a LEFT orientation, meaning the material flow is from right to left.

The quality of individual components, materials, and processing

ensures trouble-free operation and long life in demanding working conditions.

Safety features in the basic equipment

include an electronic packet guard preventing material collision with the upper pressure and an end flap with a safety switch against unintended material ejection beyond the operator's reach. Priority is given to elements that prevent operator injury or machine damage.

Automatic Loading System

The automatic loading system is part of the basic saw configuration. It is a pushing device that moves along a precise linear rail with bearings. This design ensures the long life of the linear guidance and very precise positioning of the workpiece for cutting.

Integrated Side and Top Pressure

Ensures the secure fixation of the material during the cut, both to the work table and the rear support. This ensures precise, perpendicular cuts without unintended material movement.

Clear LCD Touch Display

Enables easy and comfortable machine control. The individual control elements are well-visible, reduce operator eye strain, and provide a perfect overview. Maximum ergonomics and the designed software ensure complete control over the machine.

Work Table at the Input Before Cutting

It is smooth and allows the operator to conveniently prepare the material, which is then fed into the loading table. This eliminates downtime during the saw operation and strenuous material handling. The table tilt is 8° and is equipped with a safety flap at its end to prevent unintended material ejection beyond the operator's reach.

Basic Fixed Table at the Output After Cutting

This is standardly two meters long and partially covered in the cutting area. The operator can safely remove the cut material without being endangered by possible cut-offs, chips, or risking injury from the cutting disc. The table tilt is 8°. 

For additional machine options, refer to the "Optional Equipment" tab.

Störi Mantel automatic crosscut saws can be complemented or configured with a wide range of optional equipment. Here, we present the basic options, but if you have a different requirement or inquiry, we would be happy to discuss it with you.

Saw

Right-hand configuration - material flow is from left to right.

More powerful motor - the saw can be equipped with a 7.5 kW motor.

Saw blade of a different diameter - optionally, the saw can be fitted with a 500 mm diameter blade.

Lifting feeder - pneumatic or mechanical lifting of the feeding arm above the placed material when the feeder returns to the restart position.

Special Model - simplifies the shortening of low-quality material. The operator checks and visually evaluates each piece at the input, choosing lengths using special added buttons in the cutting scheme. The modified feeder with automatic length measurement then measures the material, and the saw cuts it according to the instructions.

Cutting Conditions

Finger pressure guide - increases the accuracy and perpendicularity of the cut. Presses the material against the support during cutting, preventing unintended movement during the cut.

Side pressure guide at the output - useful where long pieces are shortened. The pressure guide increases the accuracy and perpendicularity of the cut.

Mechanization at the Output

Extension of the basic fixed output table (smooth)

Output fixed table with rollers - facilitates the easy handling of long and heavy material.

Driven roller conveyor - can be up to 4 meters long and 400 mm wide.

Automatic ejector with inclined collecting table (gravity chutes) - simplifies the sorting of shortened material. Automatic saws can have up to two ejectors.

Rake conveyor for cutoffs or blocks.

Special Equipment

Heating of the electrical distribution panel and control panel - necessary if the machine is located in unheated spaces.